A, Equipment Application:
The unit comfortable soft PVC,such as poly(PVC by hot press method tobe extruded insulation wire core
B, the production line to the requirement of working environment:
Temperature:0-45 degrees
Power supply:three-phase 380 plus or minus 10%,50 hz with neutral wire.
No impulse voltage,interference.
C,Main technical parameters
|
The screw diameter
|
150mm
|
|
The screw length to diameter ratio
|
25:1
|
|
After sheath outside diameter
|
φ35~140mm
|
|
Maximum traction
|
2500kg
|
|
The production line speed
|
>40m/min
|
|
Steel specification
|
PN1600-PN3150
|
|
The line plate specification
|
PN1600-PN3150
|
|
Equipment center high
|
1000mm
|
|
Production line direction
|
In the face of the nose left put right
|
D,Main technical parameters
|
LF1600/3150 gantry rail walking type of passive motorized
|
1 sets of
|
|
TQD-2000-kg crawler type pneumatic tractor traction before
|
1 sets of
|
|
SJ-150×25 plastic extruder
|
1 sets of
|
|
Automatic drying feeding device
|
1 sets of
|
|
φ140 square sheathed the nose
|
1 only
|
|
24m stainless steel water trough (including 4 meters mobile sink)
|
1 sets of
|
|
Cable blow dry device
|
1 set
|
|
TQD-2500kg crawler type pneumatic tractor traction after)
|
1 set
|
|
LSP1600/walk type 3150 gantry rail line frame
|
1 sets of
|
|
Electrical control and synchronization control system
|
1 sets of
|
| 
